Technical Support

In the following sections you will be able to read about what makes our different alloys so special. They have all been carefully formulated by our team of experts for maximum performance to satisfy the production demands of our customers.

When the twin-screw extruder forms the profile, the phenomenon of exhaust hole emitting material, how to solve it? The main causes are as follows: When the twin-screw extruder is used to produce profiles, there are generally two exhaust holes on the barrel to facilitate the discharge of gases or volatiles in the material, so as to ensure the quality of the material plasticization and product quality. If t…
What are the possible reasons for the separation of the co-extrusion layer and the foam layer of the core foam profile, and how to solve it? The reasons for the separation of the co-extruded layer and the foaming layer in the process mainly include: The improper selection of the raw materials for the co-extruded layer, the insufficient length of the flow channel section, and the mismatch between the design of the cooling system an…
During the extrusion process of producing profiles, if there are air holes with material leakage, and at the same time the torque of the extruder increases, what is the cause? How should it be solved? During the extrusion process of producing profiles, if there are air holes with material leakage, and at the same time the torque of the extruder increases, what is the cause? How should it be solved? The main causes are as follows: ①If the feeding speed is too fast, the additional shear h…
Why does the single screw extruder suddenly stop automatically during the extrusion process? What are the causes and how to solve the problem? Why does the single screw extruder suddenly stop automatically during the extrusion process? What are the causes and how to solve the problem? The reasons for the sudden automatic shutdown during the extrusion process may include: ① The cooling fan has stopped rotating. …
What are the main causes of bending deformation of hard profiles in the extrusion process and their control measures? The factors that lead to the bending and deformation of profiles are many and complex, and the main reasons are: ① Die head discharge is not uniform; ② The residual internal stress in the billet is too large, which often leads to the bending of the profile; ③ The anisotropic traction resistance i…
Single-stage EX-150 Spiral Ceramic Extruder A. Features EX-150 Spiral Ceramic Extruder Six years ago, we introduced and optimized the improved German spiral ceramic film extruder technology to meet the urgent needs of Chinese water treatment industry users. In addition to using more cost-effective manufacturing parts, the fully domes…
COEX-120-2 Double-stage Ceramic Extruder A. Ceramic ultrafiltration membrane product Ceramic ultrafiltration plate membrane can effectively remove organic matter, suspended matter, toxic and harmful substances (such as radium, arsenic), micro organism, algae and oil in liquid, and is the core and key component of new efficient sep…
COEX-80-2 Double-stage Ceramic Extruder A. Features of our ceramic extruders In 2017, our company digested and absorbed the alumina ceramic membrane extruder VAHRS120B with double-stage vacuum exhaust spiral ceramic extruder technology introduced from EAC-Elektro, Germany, In order to better adapt to the needs of t…
Double-stage COEX-45-2 Vacuum Exhaust Spiral Ceramic Extruder A. Brief introduction of our company ceramic extruder In 2017, our company digested and absorbed the alumina ceramic membrane extruder VAHRS120B with double-stage vacuum exhaust spiral ceramic extruder technology introduced from EAC-Elektro, Germany, In order to better a…
Main configuration And Output Comparison Table of Recycling Granulator According to our company's sales of some domestic and foreign users of extruders and their use data Model Structure Form ConfigurationFeatures Recycled Raw Material …
Technical Proposal Of PET Flake Granulation Line 1. Material System And Process Requirements 1.1. Product application direction: Suitable for recycle PET flake granulation； 1.2.General situation of raw material system：No particular requirements of material system for explosion proof, corrosion, etc.； 1.3. …
Characteristics of SFZ Type Waste Plastic Granulator 1. Based on the shape, dirtiness and moisture content of the user's differentraw material, as well as the user's demand for the output and plasticization capacity of the recycling machine, our special design/configuration of the bimetallic barrel and screw system, the filter s…
Your Extruder Service Life Solution Often friends ask us how to improve the life of the extruder? As our Shanghai Omega Company, which has been specialized in the research and development of extruder core components manufacturing material for more than 30 years and has a certain popularity in the Chinese mainland industry, to get s…
Ceramic Ultrafiltration Membrane Product And Its Production Process Ceramic ultrafiltration plate membrane can effectively remove organic matter, suspended matter, toxic and harmful substances (such as radium, arsenic), microorganism, algae and oil in liquid, and is the core and key component of new efficient separation technology. It is a kind of ultra-fine filt…
Barrel & Screw Manufacturing Material For Food and Pharmaceutical Extruder In all of the Stainless Steel, for our experience, the hardness will be highest after quenching, it is the 440 series of Martensitic Stainless Steel, from the sheet below we can learn, such as the 440C (China corresponding grades is 9Cr18, 9Cr18Mo, 11Cr17), and the 440F (Chinese corresponding gra…
Extreme friction wear? Extreme corrosion? More than 80% filler, more than 70% enhancer? Nickel and other metals are not allowed in masterbatch? Halogen-free flame retardant, severe phosphoric acid corrosion? WHY NOT USE COMPOSI…
OMEGA-M600 PP Melt Blown Fabric Production Line Ⅰ. Main Technical Parameters o fOMEGA-M600 PP Melt Blown Fabric Production Line 1. Usage condition 1）Location: indoor safety area 2）Power supply: 50Hz, 3-phase415V, neutral, grounding 3）Temperature: 0~40…
Mask meltblown cloth equipment | Quickly Provide Mask Production Equipment Now that the new coronavirus is sweeping the world, it is imperative to fully expand the production of masks. At present in China, the equipment for producing PP meltblown fabrics is in short supply. Due to benefited from intensive cultivation in the extrusion industry for nearly 30 years, with t…
Universal Application Reason of Bimetallic C-type Liner In China, the most popular segment barrel liner in twin-mixing field, the first and the undisputed、accounting for more than 80% of the market share is the bimetallic C liner made by Shanghai Omega Company, due to its exceptional service life and appropriate sales price. All kinds of inner liner, …
Iron-base Ω101 Alloy and Its Characteristics What is the alloy Ω101? Alloy Ω101 is a special type of metal with a lower melting point yet it offers high hardness and wear resistance. These features make the material suitable for use as an alloy layer on the surface of a barrel bore, extending the service life of the extruder or inject…

Displaying 1 to 20 (of 29 articles)

1 2 Next

Technical Support

Information

Contact Us
1. Shanghai Omega Machinery Co., Ltd.
  
  Add.: No.168 Hualian Road, Putuo District, Shanghai City
  
  Contact: Williams Wu
  
  Tel.: +86-021-69921527
  
  Mobile: +86-18616920618
  
  Fax: +86-021-69921567
  
  E-mail: alphawu@126.com;965425705@qq.com
  
  WeChat No.: wxsyyk1203will

Top

Inquiry